Calibration of Dew Point Meter

Calibration of Dew Point Meter – Model SADP Shaw Moisture Meters service and calibrate their dew point meters, hygrometers and inline moisture analysers as standard. Each instrument is supplied with a Calibration Certificate traceable to Humidity Standards at the National Physical Laboratory. The most important factor regarding measurement is accuracy. Dewpoint instruments can lose accuracy over a period of time. There are many reasons for these changes which could include incorrect operation, exposure to contaminants and corrosive gases, dew point sensor deterioration (ageing) and drift in electronics. Without calibration you cannot ensure that the equipment used for dew point measurement is accurate. For continual correct measurement, regular service and calibration of dew point instruments is vital throughout their lifetime. Automatic calibration of dew point meters, also known as AutoCal, allows users to ensure accuracy between laboratory calibrations by checking the span of the instrument and correcting for any deviation. This is a major advantage of the SHAW dew point instruments. Only SHAW dew point instruments include the AutoCal function for quick and easy calibration. Tutorial – Calibration Of Dew Point Meter This tutorial demonstrates automatic calibration of dew point meters can be carried out in situ and without the need for any special equipment or skilled personnel. We would suggest performing AutoCal every two to three months but it should not replace true calibration against a known standard. If your dew point meter requires a true calibration, traceable to Humidity Standards at the National Physical Laboratory, please contact us on +44 (0)1274 733582 or mail@shawmeters.com.