Motorcycle Lifts

Motorcycle Lift installed Plymouth Devon with maximum working load 400kg, enclosed in a self-supporting mesh shaft. The platform will be 1300mm x 2400mm and guarded 900mm high on the non-loading edges. At the entrance to the lift at both levels there will be 2000mm high gates, which will be fitted with electrical interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At the lower level a 500mm long fixed ramp will be provided to assist loading on to the 50mm deep platform. The Motorcycle lift is fitted with a Fall Arrest system allowing personnel to enter the lift. Power supply 2.2kw, 415 volt, three-phase and neutral supply is required terminated in an isolator at the lower level. Control is via a hold to run, push button control station adjacent to the gates at both levels. For a quotation please contact; Manual Handling Solutions 58, Paige Close, Watlington, King's Lynn, Norfolk PE33 0TQ Tel 01553 811977 sales@manualhandlingsolutions.co.uk http://goodslifts.website/ http://www.goodslifts.website/vehicle-motorcycle-lifts/