Bespoke Goods Lifts Launceston Cornwall

Bespoke Goods Lift, 500kg Mast Design Goods Lift with a raised height 3100mm (2 stops) Platform size 2900mm x 1000mm (800mm usable) to accommodate large profile cutting dies. Platform Material Anti skid checker plate to include mesh frame down both sides of the platform. The lift will be surface mounted fitted with drop down ramps (Bridging Plate) at each end. Operation is Electro-hydraulic with Electrics 3 phase, 415v, 50Hz, 3.0Kw. Operating controls at both levels Low voltage ‘Press to Go’ push buttons fitted with key lock and emergency stop. Security Automatic locking of loading gates interfaced with lift controls Heavy Duty Troax gate locks on loading gates. Lift structure to tie into the mezzanine support at mezzanine level To supply a fully supporting lift structure, manufactured from box section steel with 25mm² galvanised mesh infill sides and double side-hinged loading gates at each level. The gates are fitted with a heavy duty interfaced lock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if a loading gate on any level is not fully closed. Colour RAL 1023 (Special Colour) Electrical - The customer is responsible for providing a mains electrical supply to the equipment site, also the provision of an isolator and all necessary wiring. An electrician should be available to assist our engineer during the latter stages of installation to enable final testing to be carried out. The electrician should be conversant with motor switch gear. The electrician will be responsible for final electrical connection from the mains isolator supply to the lift control box. For 3 phase equipment, a 415volt, 3 phase supply with earth and neutral is also necessary. The current rating required is stated in the installation instructions. Manual giving operating instructions, maintenance and service advice is provided at time of commissioning. EC Certificate of Conformity (According to Appendix 11 of the EC directive 98/37/EECO) is supplied confirming the equipment offered conforms to the essential requirements indicated by • The Machine Directive 98/37/CE • The Low-Tension Directive 73/23/EEC and its subsequent amendments 93/68 The following rules are also taken into consideration: UNI EN 1493 (as much as can be applied) -EN 292/1/2-EN294-EN349-EN418-EN982-EN 593-EN 594-1-EN 1037-EN 1088-EN 60204-1 Manual Handling Solutions www.manualhandlingsolutions.co.uk bespoke custom designed materials handling and lifting equipment. We provide some of the most advanced handling equipment available from standard products to a bespoke solution. Our range of lifting equipment and materials handling products are by far the most sophisticated and technically advanced and manufactured to the highest standard. As a Handling Solutions provider our goal is to work closely with our customers and bring the most technically advanced handling products - solutions to market. Our product range includes; Goods Lifts, Mezzanine Floor Lift, Mezz Goods Lifts, Platform Lifts, Bay Lifts, Loading Bay Lifts, Split Level Goods Lifts, Passenger Lifts, Attended Goods Lifts, Bespoke Handling Stainless Steel, Drum Handling and Cylinder Handling Equipment. Bin Tippers, Basement Lifts, DDA Access Platforms, Scissor Tables, Static Scissor Lift Tables, Bespoke custom designed Scissor Tables, Form Filler Tube Lifters, Stainless Steel fabrication, EZ Loader, Low Level Platform Lifts, Car Lifts, Lightwell Lift, Basement Goods Lifts, Access Lifts, Pallet Lift, Warehouse Goods Lifts, Hospital Bed Lifts, Wheelie Bin Lifts and Tippers, Mobile Scissor Tables. For a quotation please contact us at the following; Manual Handling Solutions 58, Paige Close Watlington, King's Lynn, Norfolk PE33 0TQ UK Tel 01553 811977 sales@manualhandlingsolutions.co.uk www.manualhandlingsolutions.co.uk http://goodslift.website/bespoke-goods-lift-for-d-s-smith-packaging/