Primary Delta Seal (DLT)

Primary Delta Seal (DLT)

The Primary Delta Seal can be used on external floating roofs or internal floating roofs. This seal design has been used on tanks from 6.0 m. to 91.0 m. in diameter, containing the full range of Crude and Refined products. The design of this joint allows the installation and removal of the latter only from the top of the roof. The effect of the seal between the roof and the tank wall is achieved by the use of trapezoidal sections of special PU foams.

The foam sections are fixed with an adhesive to the internal steel support plate. These plates and the foam blocks are encapsulated in a nylon casing coated with synthetic rubber. The envelope of the seal consists of a fabric covered with a highly abrasion resistant layer which provides a gentle and effective sealing effect. The Delta seal is in contact with the stored liquid, that is why the efficiency of the seal is very high.
For more other designs, please head to our Floating Roof Storage Tank Seals page where you can find a range of internal and external tank seals.
Did you know we are on Facebook, Twitter, Instagram and LinkedIn? Follow us to keep up to date with everything EWFM!